MAC MCS2000 Instruções de Operação descarregar pdf (Página 23)

MCS2000 by MacAllister

In more detail...

Operation

Bucking a log

Bucking is cutting a log into lengths. It is important to make sure

your footing is rm and your weight is evenly distributed on both

feet. When possible, the log should be raised and supported by the

use of limbs, logs or chocks.

Follow the simple directions >

for easy cutting. When the log

is supported along its entire

length (Fig. 31), it is cut from

the top (overbuck).

Fig. 31

When the log is supported on >

one end (Fig. 32), cut 1/3 the

diameter from the underside

(underbuck). Then make the

nished cut by overbucking to

meet the rst cut.

Fig. 32

When the log is supported >

on both ends (Fig. 33), cut

1/3 the diameter from the top

(overbuck). Then make the

nished cut by underbucking

the lower 2/3 to meet the rst

cut.

Fig. 33

When bucking on a slope >

always stand on the uphill

side of the log (Fig. 34). When

“cutting through”, to maintain

complete control release the

cutting pressure near the end

of the cut without relaxing your

grip on the product handles.

Don’t let the chain contact

the ground. After completing

the cut, wait for the saw chain

to stop before you move the

product. Always stop the

motor before moving from tree

to tree.

Fig. 34

MNL_MCS2000_DFT_GB_V06_111108.indd 23 11/8/11 5:11:18 PM

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 46 47

Comentários a estes Manuais

Sem comentários

MAC MCS2000 Instruções de Operação Página 23

Comentários a estes Manuais

Manuais e produtos relacionados com Motosserras elétricas MAC MCS2000